How does the stainless steel spinning machine work?

　  Stainless steel spinning machine is used to produce stainless steel spinning. Many people don't know much about its working principle, so let's talk about it.

1. The main working components of the centrifugal compressor for compressed gas are the impeller with high speed rotation and the diffuser with increasing flow area. That is to say, the working principle of the centrifugal compressor is to work on the gas through the impeller. In the flow path of the impeller and the diffuser, the centrifugal energy is used to convert the mechanical energy into the gas pressure energy.

2. The scroll-type air compressor is formed by the action of the equation line and the static vortex. During the process of suction, compression and exhaust, the fixed scroll is fixed on the frame, and the moving plate is driven by the eccentric shaft and is restricted by the anti-rotation mechanism, and rotates around the center of the base of the static disk with a small radius. The gas is sucked into the periphery of the static disk through the air filter core. As the eccentric shaft rotates, the gas is gradually compressed in a plurality of pairs of crescent-shaped compression chambers formed by the dynamic and static disk teeth and then continuously discharged from the axial holes of the static disk portion.

The above is the working principle of the stainless steel spinning machine. I must have some understanding of it through the above introduction.