Preparations before metal spinning process Advantages of CNC spinning

Prepare all aspects before metal spinning, which will help us to complete the entire metal processing process smoothly. Only when the preparation process is well prepared and the future processing work can be completed more smoothly, what preparations should we do?

       On the one hand, before we carry out the work of metal spinning, we must determine the model of the whole part and confirm the overall design idea of the processing, which is of great significance for us to specifically process the various processes.

        On the other hand, we need to make reasonable plans before the start of the entire metal spinning process. This plan includes time and the application of raw materials, which will help us to carry out the following work more smoothly.

Advantages of CNC spinning:

The scope of application is very wide, which is inseparable from its advantages. What are the advantages of this spinning process? Here is a brief description by Sansheng Machinery.

     1. The metal deformation condition is good. Because the rotating wheel and the metal touch are almost touched when spinning, the touch area is small and the unit pressure is high, which is suitable for processing high-strength and difficult-to-deform data.

     2. The scale of the finished product is wide. According to the ability of the spinning machine, large-diameter thin-walled pipes, special pipes, variable-section pipes, spherical and hemispherical, etc. can be manufactured, so the scale of use is wide.

     3. High data utilization rate and low production cost.

     4. The finished product has low roughness and small dimensional tolerance.

     5. It can manufacture all the seamless hollow parts of the rotary body. The bottom eliminates the defects related to the weld, such as discontinuity, strength reduction, embrittlement and tensile stress concentration.

     Of course, these are only a part of the advantages of numerical control spinning, and there are more advantages. The small series is not listed here. In short, the spinning process is a widely used and effective process.